LED & LCD Modules

Digital Measuring Units - View of Everything, Control of Everything

Reisemobil

Offroad

Blaulicht

The VOTRONIC digital measuring units are an important part of the VOTRONIC modular system covering various display possibilities. They are indispensable for measuring and control tasks in the camper or intervention vehicle with regard to the technical equipment of the vehicle, as well as for detailed information. Any combination of the units is possible, thus meeting the individual requirements of the user. Precise measurement and excellent legibility of the LCD display, even from a distance, are the outstanding features of the LCD modules. Their current consumption is such low, that the units may remain continuously switched-on, which ensures the constant availability of information at a glance. VOTRONIC digital measuring units give any desired information, such as time, inside/outside temperature or the actual battery values.

Matching to the VOTRONIC modular system, appearance and mechanics (identical height 85 mm) of the units are adapted to the other display modules. The small dimensions of the front panel and the particularly small mounting depth of only 22 mm allow an installation at almost any location. They are protected against reverse battery and can be connected by means of terminal screws or connectors. The connections are equipped with a durable label. The units will be delivered including installation and operating manual, as well as drilling jig for the furniture cutout.

Charge Control

LCD Charge Control S
Anzeigen
Strom Spannung
Instantaneous Charging Current Operating Voltage
Solarenergie Zaehler Solarleistung
Charged Solar Capacity Instantaneous Solar Energy

The LCD-Charge Control S is a comfortable, easily operable control and operating unit for the chargers of series VBCS/VAC Triple. It indicates the status of the individual charging sources, the current charging phase, the voltage of board and starter battery, as well as the instantaneous charging current.

During solar operation of the VBCS Triple, the instantaneous solar power (W) and the energy values (Wh and Ah, which can be reset to "zero" at any time) for own statistical purposes are displayed. At the push of a button, the mains charging mode of the VBCS Triple can be switched-on or -off manually or the capacity can be reduced (AC Power Limit), such as in case of weakly protected country current. A special protective function avoids the reactivation of an erroneously switched-off mains charging, if the board battery runs the risk to become totally discharged.

The large, clearly arranged display is illuminated and offers excellent legibility with very low current consumption. Retrofit of the unit, also subsequently, is easily possible by means of the plug-and-play connection, and due to the compact design it can be installed at almost any location.

The LCD-Charge Control S (Art.-No. 1247) is only compatible with the Series VBCS/VAC Triple.

Unit Type
Art.-
No.
Nominal
Operating Voltage
(Operating
Volt. Range)
[V]
Current
Con-
sumption
[mA]
Current
Consumption
Illumination
(sheddable)
max. [mA]
Measuring
Range
Dimensions
(W x H x D)
[mm]
Weight
[g]
LCD-Charge Control S 1247 12 / 24 3 30 - 80 x 85 x 24 55
Mark of Conformity: CE, E Test (EMV/Automotive Regulations)
Delivery Scope: Connection cable of 5 m length, fastening screws, manual, drilling jig

Thermometer/Clock

LCD-Thermometer Uhr S 1253
Uhr-Anzeige Temp Sensor 2001 
Clock Display with Weekday External sensor included in the delivery

This interesting unit combination consists of a 3-stage thermometer and precise crystal clock supplied by the vehicle’s board mains. A special feature is the low current consumption of the unit, as well as the large LCD display, which can be read very conveniently, even from a distance. The white background illumination of the display ensures good legibility, even with unfavourable lighting conditions. The thermometer part measures the room temperature by means of an integrated sensor. Furthermore, an external remote measurement by the supplied external sensor is possible. It can be installed below the front bumper of the vehicle to detect the outside temperature. A further external measuring input 3 is outstandingly suitable for supervision of the stored medication, refrigerator boxes or heat boxes etc. With a measuring scale of 0.1 °C, the measuring ranges of all sensors are -30 °C to +80 °C. The clock part shows minutes and hours in 24 hours format, as well as the flashing colon for operational check. The weekday is displayed in the lower row. The high-accuracy clock is equipped with a power reserve against voltage loss.

Unit Type
Art.-
No.
Nominal
Operating Voltage
(Operating
Volt. Range)
[V]
Current
Con-
sumption
[mA]
Current
Consumption
Illumination
(sheddable)
max. [mA]
Display of
Temperature
Range
[°C]
Dimensions
(W x H x D)
[mm]
Weight
[g]
LCD Thermometer/Clock S 1253 12 / 24 (8 - 32) 2 30 -30 to +70 80 x 85 x 25 70
Mark of Conformity: CE, E Test (EMV/Automotive Regulations)
Delivery Scope: 1 pc. External Sensor, plug-in type terminal screws, fastening screws, Operating Manual, drilling jig

Voltmeter

LCD-Voltmeter S 1256
Startbatterie Duo-Akku-Tester S 1245
Voltage Starter Battery
 
  Duo Storage Battery Tester S
Article-No. 1245

Precise measurement of the board voltage gives security, since the battery voltage can give first information concerning the charging state of the battery. Harmful total discharge of the board battery will be recognized immediately and can be remedied by immediate recharging. Unusual strong voltage drops during consumer operation mostly are pointing to an aged storage battery. Excessive charging caused by uncontrolled chargers or other unsuitable charging sources can be recognized and can be avoided.

LCD-Voltmeter S

This digital measuring unit effects display of the voltage rate of board and starter battery at choice. The voltage rates are displayed as exact numerical values. The additional bar graph covers a range from 10.5 to 15 Volts and indicates the most interesting range of the battery voltage from total discharge up to maximum charging voltage clearly and at a glance. When installing the unit, this function must be adjusted once to 12 V or 24 V operation. For 24 V operation the range corresponds to 21.0 to 30.0 Volts. Mixed operation, such as a 24 V starter circuit and 12 V supply circuit is also possible, since this setting can be adjusted separately for starter and board battery. Connection is effected by means of terminal screws on the unit rear. Matching to the VOTRONIC modular system, appearance and mechanics (identical height 85 mm) of the LCD Voltmeter S are adapted to the other display modules, and the small mounting depth of only 22 mm allows an installation at almost any location. If required, a background illumination of the display is possible (switchable). So, the legibility of the values is very well, even at a great distance and with all lighting conditions.

Duo Storage Battery Tester S

This compact and robust unit displays two voltage rates of the board and starter battery at choice. It represents clearly the most interesting range of the battery voltage, from total discharge up to maximum charging voltage. The luminous spot display supplies a quite precise display of the battery voltage rates, since also the intermediate values are well legible due to the different brightness of the adjacent luminous spots. At the push of a button, the voltage of board or starter battery can be selected, or the display can be switched-off. In case of low battery voltage rates, red pilot lamps indicate that battery recharging is required. Connection is effected by means of terminal screws on the unit rear. The Duo Storage Battery Tester S is executed as panel version matching to the VOTRONIC modular system. The appearance (identical height 85 mm) is adapted to the other VOTRONIC display units. Of course, it is possible to retrofit a single display in the vehicle. The small dimensions of the front panel and the particularly small mounting depth of only 15 mm allow an installation at almost any location. Storage space, which is located behind, can be used further.

Unit Type
Art.-
No.
Operating Voltage
(Battery)
[V]
Current
Consumption
[mA]
Current
Consumption
Illumination
(sheddable)
max. [mA]
Measuring
Range
Display
[V]
Dimensions
(W x H x D)
[mm]
Weight
[g]
LCD-Voltmeter S 1256 12 and 24 1 30 8 - 32 80 x 85 x 25 70
Duo Storage Batt. Tester S 1245 12 1 - 15 - 10.5 - 15.0 47 x 85 x 20 25
Measuring Scale: 0.1 V
Mark of Conformity: CE, E Test (EMV/Automotive Regulations)
Delivery Scope: Fastening screws, Operating Manual, drilling jig

Downloads

LCD-Charge Control S Anleitung Katalog
     
LCD-Thermometer/Clock S
Anleitung Katalog
     
LCD-Voltmeter S
Anleitung Katalog
     
Duo Storage Battery Tester S
Anleitung Katalog

Accessories

Casing for LCD Displays
Article-No. 2024
Dimensions (W x H x D): 87 x 83 x 27 mm
  Temperature Sensor (2nd External Sensor) for LCD-Thermometer / Clock S
Article-No. 2001 (Image left) or
Article-No. 2085 (Image right)
Aufbau Gehaeuse Kunststoff 2024  

Temp Sensor 2001  Innen Temp Sensor 2085 

Go to top