Automatic Charger VAC 1250 F 3A

Article-No. 0482

The charger series VAC-F is designed for installation in the vehicle and complies with all regulations of the FNFW of the valid fire brigade standard DIN 14679 for charging and trickle charging of auxiliary batteries and starter batteries in intervention vehicles.

Feuerwehr

VAC 12V BFront

Charging Programs:

5  6  7  8  9

Technical Features:

BR  DC  FB  LV  PL

TK  TS  Tropfen

Charging Options:

Batterien 2S

1 Supply - or 1 Starter Battery or
1 Supply and 1 Starter Battery or
2 Supply or 2 Starter Batteries

Description

  • Charging programs No. 5, 6, 7, 8 and 9 (start, gel, AGM, acid) adjustable
  • Outstanding charging technology
  • All-automatic continuous operation for permanent readiness for use of the vehicle
  • The charging voltage is exempt from peaks, and it is controlled in such a way, that overcharging is excluded
  • Trouble-free operation and simultaneous supply of the units being connected to the vehicle's board mains supply
  • Integrated charging current distributor with 2 main charging ports, each with max. current and output capacity
  • Charging current distributor output "2", can be switched to an own charging program for the starter battery
  • If required, the starter battery can also be charged with full charging current (short stop period of the vehicle)
  • Separate signalling port +86 (SP) for motor locking while the vehicle is connected to mains
  • Optical and acoustical warning in case of battery failures and operating errors
  • Precise battery temperature compensation, temperature sensor is included in the standard delivery
  • Battery regeneration in case of extended stop periods twice a week
  • Compensation of the voltage loss on the charging cables ensuring exact observation of the charging voltage rates
  • Separation of the batteries in case of power failure, overheating, incorrect behaviour (safety relay for each charging port)
  • Power pack function allows continued operation of the consumers and preservation of data, such as in case of battery replacement
  • Manual charging start for totally discharged battery according to DIN 14679
  • Variable fitting position
  • The electronic system is protected against humidity
  • Intelligent microprocessor control observing the simultaneous supply of consumers
  • The mains/charging capacity can be reduced in case of low capacity or restricted power supply, such as in case of weakly protected country current supply , generator operation etc. (power limit function)

Technical Details

 Charging Capacity in [V]/[A] 12 / 50
 Nominal Operating Voltage (AC) in [V] 230
 Operating Voltage Range (AC) in [V] 190 - 265 (Full Charging Capacity)
 Power Consumption (AC) in max. [W] 840
 Sinusoidal Power Factor Correction (CosPhi = 1) yes
 Nominal Battery voltage (DC) in [V] 12
 Battery Capacity in [Ah] 85 - 250 (500 1)
 Charging Current in [A] 50
 Auxilary Charging Port "S" in [A] -
 Characteristic Line of Charging IU1oU2
 Voltage limitation during all charging modes and programs [V] 15
 Ripple Factor Voltage in [mV] rms < 50
 Number of Charging Ports 2 + SP
 Mounting Position of Unit any
 Temperature Range [°C] -20 bis +45
 Protection Class/System of Protection I / IP 21
 Dimensions (WxDxH) in [mm] - Dimensions incl. mounting flanges, without connections
305 x 71 x 160
 Weight in [g] 2450
 Mark of conformity (CE) EN 60335-2-29
 Ambient Conditions, Humidity of Air:  max. 95 % RH, No Condensation
 Delivery Scope: Mains supply cable, 2 Temperature Sensors, Operating Manual

1 in case of stop periods of the vehicles >24 hours, acc. to DIN 14679

Charging Programs

5 „MOTOR“: Charging Program for Lead, Acid/Lead-Acid Batteries, Characteristic Line IU1oU2 Characteristic line similar to dynamo/generator for mobile application (acid accumulation) with particularly low maintenance (battery gassing, water consumption). Charging and
conservation of charge of starter batteries in intervention vehicles, according to a customary suggestion of the Standard Committee Fire Protection (FNFW). For conventional, standard
starter batteries, starter batteries being "absolutely maintenance-free", "maintenance-free according to EN", "maintenance-free according to DIN", "maintenance-free", "lowmaintenance".

6 „L“: Closed Acid/Lead-Acid Batteries with Water Consumption
L = low according to DIN EN 50342-1, characteristic line IUoU2
Characteristic line with average level U1 for acid batteries for chargers being installed in the vehicle or external chargers at a permanent location.

7 „VL“: Closed Acid/Lead-Acid Batteries with Water Consumption
VL = very low according to DIN EN 50342-1, characteristic line IU1oU2
Characteristic line with high level U1 for acid batteries for chargers being installed in the vehicle or external chargers at a permanent location.

8 „Fleece“: Closed Batteries (VRLA) with AGM/Fleece Technology,
Characteristic Line IU1oU2
Characteristic line for AGM batteries for chargers being installed in the vehicle or external chargers at a permanent location.

9 „Gel“: Closed Batteries (VRLA) with Gel Technology,
Characteristic Line IU1oU2 Characteristic line for gel batteries for chargers being installed in the vehicle or external chargers at a permanent location.

Technical Features

BR Automatic battery regeneration   DC Power pack function (battery replacement)
FB Connection remote control / remote indicator   LV Charging current distributor
for one or several batteries
PL Power limit function
(Reduction of the mains/charging capacity)
  TK Temperature compensation
TS Temperature sensor is included
in the standard delivery
  Tropfen  Electronic system humidity-proof

Downloads

Anleitung Katalog

Accessories

Fernbedienung S Ladegeraete 2075

       
Betriebs Fernanzeige IP67 Batterie-Status-Anzeige 2082

Remote Control S (Art. 2075)

Remote Indicator IP67 (Art. 2081)

Charger State Monitor IP67 (Art. 2082)

EMHC CIVD
Go to top