- Home
- /
- Other accessories
Tank sensor consisting of rubber dowel, V2A screw with washer and cable lug.
Article no. 2000
TEMPERATURE-SENSOR 825
Temperature sensor with 3 m connection cable, encapsulated against environmental influences, for all VOTRONIC devices. Suitable for M8 bolts
Article no. 2001
TEMPERATURE SENSOR 625
As before, but suitable for M6 bolts
Article no. 2088
Suitable for VOTRONIC VPC series and LCD thermometer/clock S.
Article no. 2085
Article no. 2005
Control cable as before, but without adapter.
Only for VPC combi panel and Bluetooth Connector S-BC.
Article no. 2008
Article no. 2024
MOUNTING FRAME FOR CONTROL PANEL INVERTER
For external mounting of the control panel of the VOTRONIC MobilPOWER Inverter. Fits into the VOTRONIC module system both visually and mechanically (standardised height 85 mm).
Article no. 2016
ISOLATING RELAY 12 V / 70 A
It separates the starter battery from the on-board battery after the engine has been switched off and switches both back in parallel after starting to charge the alternator. Complete with blade terminals and instructions. Dimensions incl. mounting flange, without connections: 26 x 26 x 42 mm
Not suitable for vehicles according to Euro 6 standard
Article no. 2200
Switching relay with NC contact (normally closed contact) for connecting a VBCS Triple battery charger to an existing EBL – Complete with 9.5 mm or 6.3 mm blade receptacles, dimensions incl. mounting flange, without connections: 33 x 29 x 41 mm
Article no. 2202
HIGH PERFORMANCE-ISOLATING RELAY 12 V / 140-200 A
Version as article no. 2200, but more powerful and equipped with spark extinguishing diode. Power connections: M6 screw bolt; control connections: 6.3 mm blade terminals. Complete with blade receptacles
and instructions. Dimensions incl. mounting flange, without connections:
45 x 45 x 63 mm
Article no. 2203
RESIDUAL CURRENT DEVICE RCBO 16-30
Residual current device with 2-pole switching circuit breaker in industrial housing with space for an additional 2-pole RCD or 2 circuit breakers. Version with transparent door to utilise the storage space. Protection against overload and short circuit in the vehicle’s 230 V network and against electrical accidents (personal protection). Fuse switching capacity 230 V/16 A, RCD tripping current 30 mA, TÜV/GS-tested. Dimensions (WxHxD) 140 x 150 x 100 mm
Article no. 2152
Mini version (image right) without additional fuse slots Dimensions (WxHxD) 100 x 140 x 100 mm
Article no. 2151
- 1x high-load fuse (100 A…250 A) with M8 threaded bolt for large loads such as inverters, lifting supports etc.
- 4x automotive screw-in fuse (30 A…150 A) with M5 threaded bolts for powerful individual consumers, charging sources and as a back-up fuse for other positive distributors.
The common battery connection can be placed on the left or right side depending on the installation and space conditions. Supplied without fuses. Dimensions (W x H x D): 116 x 40 x 95 mm
Article no. 2216
Fully insulated fuse holder for high-load fuses for protecting large consumers or high-load circuits. The fuse holder can be bayed and is equipped with M5 threaded bolts on both sides. Supplied without vehicle screw-in fuse. Dimensions (WxHxD): 61 x 25 x 30 mm
Article no. 2218
For current ratings and item no. see price list
Fully insulated fuse holder for high-load fuses for protecting large loads or high-load circuits. The fuse holder can be bayed and is equipped with M8 threaded bolts on both sides. Supplied without high-load fuse. Dimensions (W x H x D): 122 x 39 x 42 mm
Article no. 2251
For current ratings and item no. see price list
Fuse holder with M5 threaded bolt on both sides for strip fuses to protect larger loads. Supplied without fuse. Dimensions (W x H x D): 70 x 22 x 42 mm
Article no. 2242
For current ratings and item no. see price list
Fully insulated fuse holder (IP 56) for use with automotive flat fuses. Stranded wire 2.5 mm² red, approx. 235 mm long on both sides. Supplied without fuse. Dimensions (W x H x D): 39 x 27 x 14 mm
Article no. 2213
Please be sure to check the compatibility of your Schaudt electric block (EBL) and the corresponding control and display panel in advance. You can find more information on our website under the menu item “Solar controller technology”.
Article no. 2007
PICTOGRAM FILM BLACK
Article no. 2112
Charging technology at the highest level
The battery is the central element of a vehicle’s electrical system. It requires the greatest attention, maintenance and care and, above all, it must be charged correctly.
PRODUCT BROCHURES 2024
